Ihr Bedarf geht darüber hinaus?
Menge | |
---|---|
1+ | CHF 1.220 |
10+ | CHF 0.970 |
50+ | CHF 0.907 |
100+ | CHF 0.756 |
250+ | CHF 0.728 |
500+ | CHF 0.713 |
1000+ | CHF 0.703 |
Produktspezifikationen
Produktbeschreibung
The SN74ALVCH16244DGGR is a 16-bit Buffer/Driver with 3-state outputs and designed for 1.65 to 3.6V VCC operation. The SN74ALVCH16244 is designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers and bus-oriented receivers and transmitters. The device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer. It provides true outputs and symmetrical active-low output-enable inputs. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor and the minimum value of the resistor is determined by the current-sinking capability of the driver. Active bus-hold circuitry holds unused or un-driven inputs at a valid logic state. Use of pull-up or pull-down resistors with the bus-hold circuitry is not recommended.
- Bus hold on data inputs eliminates the need for external pull-up/pull-down resistors
- 3ns at 3.3V Propagation delay (tpd)
- ±24mA Output drive at 3.3V
- Latch-up performance exceeds 250mA per JESD 17
- Green product and no Sb/Br
Anwendungen
Industrie, Automatisierung & Prozesssteuerung, Signalverarbeitung, Takt & Timing
Technische Spezifikationen
Puffer/Leitungstreiber, nicht invertierend
TSSOP
48Pin(s)
3.6V
7416244
85°C
-
74ALVC16244
TSSOP
1.65V
74ALVC
-40°C
-
No SVHC (27-Jun-2018)
Gesetzgebung und Umweltschutz
Land, in dem der letzte Fertigungsprozeß ausgeführt wurde.Herkunftsland:Malaysia
Land, in dem der letzte Fertigungsprozeß ausgeführt wurde.
RoHS
RoHS
Produkt-Konformitätszertifikat