TLD5099EPVSEPICEVALTOBO1

TLD5099EPVSEPICEVALTOBO1 is an evaluation board in SEPIC topology designed as constant voltage regulator. The evaluation board for medium power application with TLD5099EP configured in voltage-mode SEPIC topology. It can be implemented as a DC-DC power supply with constant voltage output. The default configuration of the board is voltage-mode SEPIC topology without any additional features enabled. In this configuration, it can deliver up to 12W to the load with an efficiency above 85%. Auxiliary circuits which protect the DC-DC and the load during short to ground, forcing the current to zero, are not present. The short to ground current is limited to a few amps by the embedded current control loop.

• Input supply voltage range from 8 to 27V (Down to 6.5V for less than 2s)
• 1A maximum output current at resistive load
• 400KHz switching frequency at VIN = 13.2V, spread spectrum "on"
• Efficiency > 85% (measured with a 12ohm power resistor as load)
• 12V output voltage (output voltage related to ground)
• 16V output overvoltage protection (output voltage related to ground)

Warnungen und Hinweise

Aufgrund der Marktnachfrage nach diesem Produkt kommt es zu längeren Lieferzeiten. Liefertermine weichen möglicherweise ab. Das Produkt ist von Rabattaktionen ausgenommen.