Benachrichtigen Sie mich, wenn das Produkt wieder vorrätig ist
Menge | |
---|---|
1+ | CHF 10.380 |
10+ | CHF 7.670 |
25+ | CHF 7.660 |
50+ | CHF 7.650 |
100+ | CHF 6.240 |
250+ | CHF 6.120 |
Produktspezifikationen
Produktbeschreibung
The ACPL-782T-000E is an automotive Isolation Amplifier is designed for voltage and current sensing in electronic motor drives and battery system monitoring. In a typical implementation and motor currents flow through an external resistor and the resulting analog voltage drop is sensed by the ACPL-782T. A differential output voltage is created on the other side of the ACPL-782T optical isolation barrier. This differential output voltage is proportional to the motor current and can be converted to a single-ended signal by using an op-amp as shown in the recommended application circuit. Since common-mode voltage swings of several hundred volts in tens of nanoseconds are common in modern switching inverter motor drives, the ACPL-782T was designed to ignore very high common-mode transient slew rates (of at least 10kV/μs).
- Fully differential circuit topology
- ±2% Gain tolerance at 25°C
- 15kV/μs Common-mode rejection at VCM=1000V
- 30ppm/°C Gain grift vs. temperature
- 0.004% Nonlinearity
Anwendungen
Fahrzeugelektronik, Sensortechnik, Systemüberwachung
Technische Spezifikationen
1Verstärker
DIP
8Pin(s)
3.75kVrms
100kHz
0.004%
Durchsteckmontage
125°C
No SVHC (12-Jan-2017)
DIP
1 Kanal
4.5V bis 5.5V
DIP
-
100kHz
Optisch
-40°C
-
2mV
1 Verstärker
Technische Dokumente (3)
Gesetzgebung und Umweltschutz
Land, in dem der letzte Fertigungsprozeß ausgeführt wurde.Herkunftsland:Singapore
Land, in dem der letzte Fertigungsprozeß ausgeführt wurde.
RoHS
RoHS
Produkt-Konformitätszertifikat