LT6300IGN#PBF

LT® 6300 is a 500mA minimum output current, dual op amp with outstanding distortion performance. The amplifiers are gain-of-ten stable, but can be easily compensated for lower gains. The extended output swing allows for lower supply rails to reduce system power. Supply current is set with an external resistor to optimize power dissipation. The LT6300 features balanced, high impedance inputs with low input bias current and input offset voltage. Active termination is easily implemented for further system power reduction. Short-circuit protection and thermal shutdown insure the device’s ruggedness. Typical applications include high efficiency ADSL, HDSL2, SHDSL line drivers, buffers, test equipment amplifiers and cable drivers.

• Specified at ±12V and ±5V
• Exceeds all requirements for full rate, downstream ADSL line drivers
• Power saving adjustable supply current
• Gain-bandwidth product: 200MHz typ at f = 1MHz
• Slew rate: 600V/µs typ at VS = ±12V, AV = -10
• 3rd harmonic distortion: -82dBc at 1MHz, 2VP-P into 50 ohm
• 500mA min maximum output current
• ±10.9V/±10.7V output swing, VS = ±12V, RL = 100 ohm/IL = 250mA
• 16 lead SSOP package
• Operating temperature range from -40 to 85°C

Hinweise

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party