JM38510/13503BPA

JM38510/13503BPA is a low noise, precision operational amplifier that combines the low offset and drift of the OP07 with both high speed and low noise. Offsets down to 25µV and a maximum drift of 0.6µV/°C make the OP27 ideal for precision instrumentation applications. Low noise, en = 3.5nV/√Hz, at 10Hz, a low 1/f noise corner frequency of 2.7Hz, and high gain (1.8 million), allow accurate high-gain amplification of low-level signals. A gain bandwidth product of 8MHz and a 2.8V/µs slew rate provide excellent dynamic accuracy in high speed, data-acquisition systems. A low input bias current of ±10nA is achieved by use of a bias current cancellation circuit. Over the military temperature range, this circuit typically holds IB and IOS to ±20nA and 15nA, respectively. The output stage has good load driving capability. A guaranteed swing of ±10V into 600 ohm and low output distortion make the OP27 an excellent choice for professional audio applications.

• 10µV typical input offset voltage (VS = ±15V, TA = 25°C)
• 0.08µV p-p typical input noise voltage (VS = ±15V, TA = 25°C)
• Typical input voltage range is ±12.3V (VS = ±15V, TA = 25°C)
• 126dB typical common mode rejection ratio (VCM = ±11V, TA = 25°C)
• 1µV/V typical power supply rejection ratio (VS = ±4V to ±18V, TA = 25°C)
• 1800V/mV typical large signal voltage gain (RL ≥ 2kohm, VO = ±10V, TA = 25°C)
• 2.8V/µs typical slew rate (RL ≥ 2kohm, TA = 25°C)
• 8MHz typical gain bandwidth product (VS = ±15V, TA = 25°C)
• 90mW typical power consumption (VS = ±15V, TA = 25°C)
• 8 lead metal can (TO-99) package, operating temperature range from -55°C to +125°C

Hinweise

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party