AD8506ACBZ-REEL7

AD8506 is a dual channel, micropower amplifier featuring rail-to-rail input/output swings while operating from a single 1.8V to 5V power supply or from dual ±0.9V to ±2.5V power supplies. Using a new circuit technology, this amplifier offers zero input crossover distortion (excellent PSRR and CMRR performance) and low bias current while operating with a supply current of less than 20μA per amplifier. This amplifier offers the lowest noise in its power class. This combination of features make the device ideal choices for battery-powered applications because it minimizes errors due to power supply voltage variations over the lifetime of the battery and maintain high CMRR even for a rail-to-rail input op-amp. It is used in applications such as pressure and position sensors, remote security, bio sensors, IR thermometers, battery-powered consumer equipment, hazard detectors.

• Rail-to-rail input/output
• Common-mode rejection ratio is 100dB typical at (VSY = 1.8V, VCM = VSY/2, TA = 25°C)
• Power supply rejection ratio is 110dB typical at (VSY = 1.8V, VCM = VSY/2, TA = 25°C)
• Supply current per amplifier is 16.5µA typical at (VSY = 1.8V, VCM = VSY/2, TA = 25°C)
• Low noise is 45nV/√Hz typical at (1KHz, VSY = 1.8V, VCM = VSY/2, TA = 25°C)
• Slew rate is 13mV/µs typical at (RL = 100Kohm, CL = 10pF, G = 1)
• Gain bandwidth product is 95KHz typical at (VSY = 1.8V, VCM = VSY/2, TA = 25°C)
• Input bias current is 1pA typical at (VSY = 1.8V, VCM = VSY/2, TA = 25°C)
• Large-signal voltage gain is 115dB typical at (VSY = 1.8V, VCM = VSY/2, TA = 25°C)
• Operating temperature is -40°C to +125°C, package style is 8-lead WLCSP

Hinweise

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party