MAX3420EECJ+

USB peripheral controller with SPI interface. It contains the digital logic and analogue circuitry necessary to implement a full-speed USB peripheral compliant to USB specification rev 2.0. A built-in full-speed transceiver features ±15KV ESD protection and programmable USB connect and disconnect.

• Simplifies adding USB to any system (Microprocessor-independent USB solution)
• Complies with USB specification Revision 2.0 (full-speed operation)
• Integrated full-speed USB transceiver and intelligent USB Serial-Interface Engine (SIE)
• Firmware/hardware control of an internal D+ Pullup resistor
• Programmable 3 or 4-wire 26MHz SPI interface, handles low-level USB signalling details
• Automatically handles USB flow control and double buffering
• Internal comparator detects VBUS for self-powered applications
• Interrupt output pin allows polled or interrupt-driven SPI interface
• SETUP data has its own 8-byte FIFO, simplifying firmware
• ESD protection on D+, D- and VBCOMP improves system reliability

Avertissements

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

Remarques

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party