MAX4552CEE+

The MAX4552CEE+ is a ±15KV ESD protected, quad, low voltage SPST analogue switch in 16 pin QSOP package. This switch is protected against ±15KV electrostatic discharge (ESD) shocks per IEC 1000-4-2 without latch-up or damage. It can handle rail to rail analogue signals. The off leakage current is only 1nA at 25°C and 10nA at +85°C. This CMOS switch can operates with dual power supplies ranging from ±2V to ±6V or a single supply between +2V and +12V. It is fully specified for single +2.7V operation. All digital inputs have +0.8V and +2.4V logic thresholds ensuring TTL/CMOS logic compatibility when using ±5V or a single +5V supply. The device is pin compatible with industry standard DG212 device. The MAX4552 is used in data acquisition, battery operated equipment, test equipment, avionics, audio signal routing and networking application.

• Four normally open (NO) switches, operating temperature range from 0°C to 70°C
• V+ supply current of 0.05µA and V- supply current of 0.05µA at +25°C with dual supply
• Charge injection of 2pC at CL = 1nF, TA = 25°C with dual supply
• Off isolation of less than -90dB at f = 100KHz, RL = 50 ohm, CL = 15pF with dual supply
• Low power consumption of less than 1μW, 4 separately controlled SPST switches
• Channel to channel crosstalk of less than or equal to -90dB at f = 100KHz with dual supply
• Maximum on-resistance is 120 ohm at TA = +25°C with dual supply
• Maximum turn-on time is 110ns and maximum turn-off time is 90ns at +25°C with dual supply
• Maximum on-resistance match between channels is 4ohm at +25°C with dual supply
• Maximum on-resistance flatness is 8ohm at +25°C with dual supply

Anwendungen

Signalverarbeitung, Luftfahrtelektronik, Tragbare Geräte

Hinweise

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party