MAX22199EVKIT#

MAX22199EVKIT# is a MAX22199 evaluation kit (EV kit) that provides the hardware and software necessary to evaluate the MAX22199 octal industrial digital input device. The MAX22199 EV kit receives commands from a PC through the USB port to create a SPI interface for communication between the software and the MAX22199 on the EV kit. The MAX22199 EV kit also has a Pmod™ compatible connector for SPI communication with an external host device such as a MCU or FPGA. The EV kit includes a graphical user interface (GUI) that provides communication between the target device and the PC. The MAX22199 EV kit has a MAX22199 device that supports Type 1, 3 inputs with the current sink limit set by an on-board resistor. The MAX22199 EV kit is designed to support transient immunity testing for ESD, EFT, and Surge according to IEC 61000-4-2, IEC 61000- 61000-4-4, and IEC 61000-4-5 respectively.

• Easy evaluation of the MAx22199
• EV kit logic side is USB-powered
• Configured for IEC 61131-2 type 1, 3
• Galvanic isolation using MAX14483
• Supports transient immunity testing to IEC 61000-4-2, IEC 61000-4-4, and IEC 61000-4-5
• Robust design ±2KV surge tolerant line-to-GND and line-to-line, ±8KV contact ESD
• Robust design: ±15KV airgap ESD at field inputs
• Windows® 10 compatible software
• Fully assembled and tested
• Proven PCB layout

Lieferumfang

MAX22199EVKIT#, including the MAX22199ATJ+, Micro-USB cable.

Hinweise

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party