LT1300CS8#PBF

LT1300 is a micropower step-up DC/DC converter that utilizes Burst Mode™ operation. It features programmable 5V or 3.3V output via a logic-controlled input, onload quiescent current of 120µA and a shutdown pin which reduces supply current to 10µA. The on-chip power switch has a low 170mV saturation voltage at a switch current of 1A, a four-fold reduction over prior designs. A 155KHz internal oscillator allows the use of extremely small surface mount inductors and capacitors. This allows more energy to be extracted from the battery increasing operating life. The ILIM pin can be used to program peak switch current with a single resistor allowing the use of less expensive and smaller inductors and capacitors in lighter load applications. It is used in application such as palmtop computers, portable instruments, bar-code scanners, DC/DC converter module replacements, battery backup supplies, personal digital assistants, PCMCIA cards etc.

• Upto 220mA output current at 5V from 2V supply
• Supply voltage as low as 1.8V
• Upto 88% efficiency, small inductor –10µH
• Low VCESAT switch is 170mV at 1A typical
• Uses inexpensive surface mount inductors
• Maximum duty cycle is 86% typ at (TA = 25°C, VIN = 2V)
• Switch leakage current is 10µA max at (TA = 25°C, VIN = 2V)
• Operating temperature is 0°C to 70°C
• Package style is 8-lead plastic SOIC

Hinweise

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party