Ihr Bedarf geht darüber hinaus?
| Menge | |
|---|---|
| 1+ | CHF 12.810 |
| 10+ | CHF 8.900 |
| 98+ | CHF 6.620 |
| 196+ | CHF 6.490 |
| 294+ | CHF 6.360 |
| 588+ | CHF 6.220 |
Produktspezifikationen
Produktbeschreibung
ADA4637-1 is a single channel, wide bandwidth precision amplifier featuring low noise, very low offset, drift, and bias current. This amplifier combines the best specifications of precision dc and high speed ac op-amps. It is a decompensated version of the ADA4627-1 and is stable at a noise gain of 5 or greater. With a typical offset voltage of only 70μV, drift of less than 1μV/°C, and noise of only 0.86μV p-p (0.1Hz to 10Hz), this device is well suited for applications where error sources cannot be tolerated. It is used in applications such as high impedance sensors, photodiode amplifier, precision instrumentation, phase-locked loop filters, high end, professional audio, DAC output amplifier, ATE, medical.
- Low offset voltage is 200μV maximum at (VSY = ±15V, VCM = 0V, TA = 25°C)
- Offset drift is 1μV/°C typical at (VSY = ±15V, VCM = 0V, TA = 25°C)
- Very low input bias current is 5pA maximum at (VSY = ±15V, VCM = 0V, TA = 25°C)
- Dual supply operation range from ±5V to ±15V
- Gain bandwidth is 79.9MHz typical at (VSY = ±15V, VCM = 0V, TA = 25°C)
- Voltage noise is 6.1nV/√Hz typical at 1KHz
- Slew rate is 170V/μs typical at (VSY = ±15V, VCM = 0V, TA = 25°C)
- High gain is 120dB typical at (VSY = ±15V, VCM = 0V, TA = 25°C)
- High CMRR is 116dB typ at (TA = 25°C), high PSRR is 112 dB typical (TA = 25°C)
- Operating temperature is -40°C to +125°C, package style is 8-lead SOIC_N
Hinweise
ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party
Technische Spezifikationen
1Kanäle
170V/µs
NSOIC
JFET
70µV
Oberflächenmontage
125°C
-
No SVHC (21-Jan-2025)
-
1 Verstärker
79.9MHz
± 5V bis ± 15V
8Pin(s)
-
1pA
-40°C
-
MSL 1 - unbegrenzt
NSOIC
79.9MHz
170V/µs
Technische Dokumente (1)
Gesetzgebung und Umweltschutz
Land, in dem der letzte Fertigungsprozeß ausgeführt wurde.Herkunftsland:Philippines
Land, in dem der letzte Fertigungsprozeß ausgeführt wurde.
RoHS
RoHS
Produkt-Konformitätszertifikat