MAX32666EVKIT#

MAX32666EVKIT# is an evaluate kit that provides a platform for evaluating the capabilities of the MAX32665 and MAX32666 high-efficiency Arm® microcontrollers and audio DSP for wearable and hearable device applications.

• Bluetooth SMA connector with a 2.4GHz hinged whip antenna, 64MB XIP flash, 1MB XIP RAM
• 1.28in 128 x 128 monochrome TFT display, Stereo audio codec with line-in and line-out 3.5mm jacks
• Digital audio microphone, USB 2.0 micro B interface, USB 2.0 Micro B to serial UARTs
• Micro SD card interface
• Select GPIOs accessed through a 0.1in header
• Access to the 8 analogue inputs through a 0.1in header
• Arm® or SWD JTAG 20-Pin header, 1-wire RJ11 port, Arm® or SWD JTAG 20-pin header, 1-Wire RJ11 port
• Can be solely sourced by a coin cell battery, board power provided by either USB port
• Individual power measurement on all IC rails through jumpers, on-board 1.8V and 3.3V regulators
• Two general-purpose LEDs and two general-purpose pushbutton switches

Contenu

MAX32666 EV kit containing a MAX32666 with a preprogrammed demo, Bluetooth® hinged whip antenna, MAX32625PICO debugger with cables, Two standard A to Micro B USB cables, Extra shunts.

Remarques

Les produits ADI sont autorisés (et vendus) uniquement pour une utilisation par le client et ne doivent pas être revendus ou transmis d'aucune manière à une tierce partie.