Ihr Bedarf geht darüber hinaus?
| Menge | |
|---|---|
| 1+ | CHF 3.800 |
| 10+ | CHF 3.670 |
| 25+ | CHF 3.540 |
| 50+ | CHF 3.420 |
| 100+ | CHF 3.290 |
| 250+ | CHF 3.170 |
| 500+ | CHF 3.040 |
Produktspezifikationen
Produktbeschreibung
The SN65LVDT390PW is a differential Line Receiver implements the electrical characteristics of low-voltage differential signalling (LVDS). This signalling technique lowers the output voltage levels of 5V differential standard levels (such as EIA/TIA-422B) to reduce the power, increase the switching speeds and allow operation with a 3V supply rail. Any of the differential receivers provides a valid logical output state with a ±100mV differential input voltage within the input common-mode voltage range. The input common-mode voltage range allows 1V of ground potential difference between two LVDS nodes. Additionally, the high-speed switching of LVDS signals almost always requires the use of a line impedance matching resistor at the receiving end of the cable or transmission media. The LVDT products eliminate this external resistor by integrating it with the receiver.
- Open-circuit failsafe
- Flow-through pin-out
- Integrated 110Ω line termination resistors on LVDT products
- Bus-terminal ESD exceeds 15kV
- LVTTL levels are 5V tolerant
- 2.6ns Typical propagation delay time
- 100ps Typical output skew
- <lt/>1ns Part-to-part skew
- Green product and no Sb/Br
Anwendungen
Wireless, Kommunikation & Netzwerke, Computer & Computerperipheriegeräte
Technische Spezifikationen
LVDS-Empfänger
85°C
3.6V
16Pin(s)
LVTTL
-
MSL 1 - unbegrenzt
-40°C
3V
TSSOP
LVDS
4bit
-
No SVHC (27-Jun-2018)
Gesetzgebung und Umweltschutz
Land, in dem der letzte Fertigungsprozeß ausgeführt wurde.Herkunftsland:Taiwan
Land, in dem der letzte Fertigungsprozeß ausgeführt wurde.
RoHS
RoHS
Produkt-Konformitätszertifikat