Low

TXB0104RGYR - 

Spannungspegelumsetzer, bidirektional, 4 Eingänge, 0.02mA, 4ns, 100Mbps, 1.2V bis 3.6V, QFN-14

TEXAS INSTRUMENTS TXB0104RGYR

Abbildung ggf. ähnlich. Alle Angaben ohne Gewähr. Ausschlaggebend sind die Produktinformationen des Herstellers.

Herstellerteilenummer:
TXB0104RGYR
Bestellnummer:
1704554
Technisches Datenblatt:
(EN)
Technische Dokumentation anzeigen

Produktspezifikationen

:
14Pin(s)
:
QFN
:
1.2V
:
-40°C
:
3.6V
:
4
:
4ns
:
85°C
:
Pegelumsetzer
:
-
:
20µA
:
Gurtabschnitt
:
-
:
MSL 2 - 1 Jahr
Finden Sie ähnliche Produkte Passen Sie die Auswahlkriterien oben an, um nach ähnlichen Artikeln zu suchen.

Produktbeschreibung

The TXB0104RGYR is a 4-bit Non-inverting Translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 to 3.6V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 to 5.5V. When the OE input is low, all outputs are placed in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pull-down resistor, the minimum value of the resistor is determined by the current-sourcing capability of the driver. The TXB0104 is designed so that the OE input circuit is supplied by VCCA. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
  • VCC Isolation feature - If either VCC input is at GND, all outputs are in the high-impedance state
  • OE Input circuit referenced to VCCA
  • Ioff Supports partial-power-down mode operation
  • Latch-up performance exceeds 100mA per JESD, 78 class II
  • 5µA Maximum low power consumption
  • Green product and no Sb/Br

Anwendungen

Computer & Computerperipheriegeräte, Unterhaltungselektronik, Tragbare Geräte

Zugehörige Produkte