Low

TLE2142CDG4 - 

Operationsverstärker, zweifach, 2 Verstärker, 5.9 MHz, 27 V/µs, ± 2V bis ± 22V, SOIC, 8 Pin(s)

TEXAS INSTRUMENTS TLE2142CDG4

Abbildung ggf. ähnlich. Alle Angaben ohne Gewähr. Ausschlaggebend sind die Produktinformationen des Herstellers.

Herstellerteilenummer:
TLE2142CDG4
Bestellnummer:
1234654
Technisches Datenblatt:
(EN)
Technische Dokumentation anzeigen

Produktspezifikationen

:
2 Verstärker
:
8Pin(s)
:
5.9MHz
:
SOIC
:
-55°C
:
125°C
:
27V/µs
:
± 2V bis ± 22V
:
-
:
Stückweise
:
-
:
MSL 1 - unbegrenzt
Finden Sie ähnliche Produkte Passen Sie die Auswahlkriterien oben an, um nach ähnlichen Artikeln zu suchen.

Produktbeschreibung

The TLE2142CDG4 is a dual low-noise high-speed high-performance internally compensated Operational Amplifier built using Texas Instruments complementary bipolar Excalibur process. The design incorporates an input stage that simultaneously achieves low audio-band noise of 10.5nV//100pF load is useful in fast actuator/positioning drivers. Under similar test conditions, settling time to 0.01% is 400ns. The device is stable with capacitive loads up to 10nF, although the 6MHz bandwidth decreases to 1.8MHz at this high loading level. As such, the TLE214x is useful for low-droop sample-and-holds and direct buffering of long cables, including 4 to 20mA current loops. The special design also exhibits an improved insensitivity to inherent integrated circuit component mismatches as is evidenced by a 500µV maximum offset voltage and 1.7µV/°C typical drift. Minimum common-mode rejection ratio and supply-voltage rejection ratio are 85 and 90dB, respectively.
  • 10000pF Load capability
  • 20mA Minimum short-circuit output current
  • 500µV at 25°C Maximum low VIO
  • 150ns Saturation recovery
  • Large output swing - VCC- +0.1 to VCC+ -1V
  • Green product and no Sb/Br

Anwendungen

Audio

Alternativen

Zugehörige Produkte

Produkte vergleichen